"WITEG" Electronical Digital Pipets, WITOPET™, with Motorized Tip Ejection, 2㎕~1000㎕, WITOPET(R) EP 디지털 다기능 피펫, Pipetting/Multidispense/Manual Function/Diluting/Settings
Pipet, Electrical, EP 1000, 200 ~ 1000 ㎕l, divi. 10.0㎕
ea/1
525,600원
52,560원
WI.5497500EP
Battery Charger
ea/1
73,900원
7,390원
※ Note! 표시가격은 환율 및 원자재 변화로 변동될 수 있으며 권장 소비자 가격임 ( VAT 별도)☏ 02)967-5978 규격외 주문제작 및 가격 내고 가 필요로 하신 분은 별도로 견적요청 or 전화문의 바랍니다. FAX:02)967-5979 ※인터넷 주문이 필요하신 분은 우측상단의 상품선택에서 주문 가능합니다
■ 용도(Applications) * Simple One - handed Operation Right- or Left-handed * Avoid the Repetitive Strain Injuries and Related Pain by Manual Tip Ejection * Battery for over 4000 Pipetting Cycles before Requiring a Recharge of the Battery * Advanced pipetting technology in the design of the conventional manual operated pipette - uncomplicated one - handed operation right- or left-handed * The Large Clearly Arranged Display in Lateral Position, is easy to read, opreation is uncomplicated and intuitive, only four operation button s needed for all functions, even when wearing gloves. * Less than 200 grams and the Slim Body for a Relaxed Grip * Simple Uncomplicated Interface with only 4 ?asy-to-use?buttons * 인체공학적 설계로 잡기가 편안하고, Standard Pipetting 중, 95% 이상의 불필요한 힘의 감소를 제공. * 대부분의 전자식 피펫보다 더 작고 가벼움. * 크고 선명한 디스플레이로 Reading과 Operation이 쉬움. * 재충전하기 전까지 4000번의 Pipetting이 가능한 공간 절약형의 가벼운 Battery. * Tip Ejection with acoustic signal: After completion of the pipetting press the tip ejection button a the reverse side for releasing the tip. An acoustic signal confirms your action. * Pipetting Process : The pipetting process, aspiration and dispensing, are initiated by pressing the large button on the pipette head, which is in conformity with the conventional digital pipette. * Battery Charger : Supplied with every pipet. For a short recharging-time. * Size : Length 300 mm
■특 징 (Features ) Six "Easy-to-use" Functions (1) Pipet Function : In AUTO mode the pipette performs the aspirating and dispensing of the selected liquid volume. "Blow-out" function can be set. (2) REVERSE PIPETTING The Automatic Reverse Pipetting, in different modes is to reserve the final drop of sample, a higher volume than required is aspirated. This function is recommended for the pipetting of high-viscose media and high steam pressure respectively. (3) MULTIDISPENSING (MD) MODE The Pipette performs repetitive dispensing of a selected volume, e.g. filling of 96-well microliter plates, you can select the number of dispenses and the pipetting function in sequences. (4) MIX FUNCTION (MIX) After the settings are completed, Mixing of different kinds of media is performed. The Mix Function is controlled via the trigger button. (5) PIPETTING SPEED (SPEED) The Selection of Available Speeds of the piston for the aspirating and dispensing enables the pipetting of media with different properties, e.g. viscosity. (6) SEQUENTIAL ASPIRATING / DISPENSING (SE) MODE Functions-Mode SA: The ?P?Pipette performs repetitive aspirating of the selected volume Between two aspirations automatically an air gap. When the sequential aspiration is completed, The total aspirated volume is dispensed in the next step. Functions-Mode SD: The ?P?Pipette performs repetitive dispenses of the selected volume When the first aspiration is completed, the pipette will sequentially dispense their aspiration. volume.
이 상품에 적용된 할인내역입니다
