※ 표시가격(소비자)은 환율, 원자재 변화따른 변동으로 견적 요청 하여 주시면 성심껏 답변드리겠습니다.(VAT 별도)
※ 인터넷 주문이 불편 하신 분은 전화 혹은 팩스로 직접 주문 가능합니다.
※ 규격 외 주문제작 및 가격 네고가 필요로 하신 분은 별도로 견적요청 or 전화문의 바랍니다. ☏ 02)967-5978 FAX 02)967-5979
※ 관공서, 정부출연 연구기관, 학교관련 구매과 결재, 후불결재, 연구비카드승인, 관련건은 전화상담 후 별도 처리하여드립니다.
■ 용도(Applications)
Epoxi-Patch
■특 징 (Features )
■ 규격(Specifications)
Epoxi-Patch® Adhesive
50 Minute Worklife / Ultra Clear / General Purpose
1. Before mixing, prepare surfaces to be clean, dry, and free of oil. grease, or wax, Epoxi-Patch® bonds best when surfaces are thoroughly roughened with an emery cloth or sandpaper and cleaned with solvent prior to applying adhesive.
2. Mix both resin and hardener on a discardable, clean, dry, flat surface.
3. Squeeze an even amount of Resin and Hardener parallel to each other onto the mixing surface.
Note : For even cut-off, tilt tube firmly against mixing surface.
4. Mix thoroughly until both resin and Hardener blend into one uniform color.
5. Apply adhesive within 50 minutes after mixing.
6. Store tubes with caps securely tightened until next use.
Cure : Full cure properties are obtained in 3 days. 90% of full cure properties can be achieved in 24 hrs. Cure may be accelerated by heat such as 2 hours at 140℉.
• 포장내역
Resin : NET WT. 2.54 OZ. (72g)
Hardener : NET WT. 0.8 OZ. (22.7g) |
이 상품에 적용된 할인내역입니다
